Liqui Moly Bike Tyre Fix Spray 75ml

Liqui Moly’s inner tube sealer will allow you to quickly repair an inner tube in case of failure without having to remove the tire.

• Capacity: 75ml
• For bicycle inner tubes in sizes from 21 to 29 inches
• Also works well for electric bicycles
• Can be used for all common bicycle valves such as Schrader, Presta and Dunlop
• Cannot be used if the side surface of the inner tube or tire is damaged or if the tire has slipped off the rim.

How to use?

1. Before use, remove the cause of the puncture (such as a nail or glass). Adjust the wheel so that the valve is at the 12 o’clock position and completely deflate the tire.
2. Shake the bottle
3. Holding the can vertically, screw the applicator tip onto the tire valve
4. Empty the entire contents of the can into the tire. The product simultaneously seals the puncture and pumps up the tire
5. Quickly unscrew the tip and remove excess product from the valve
6. Immediately start driving or rotate the wheel so that the preparation is evenly distributed inside the tire
7. After a few minutes, check the tire pressure and add air if necessary
8. In most cases, a permanent sealing layer is formed after about 10 minutes to protect the puncture

Safety Information

Hazard statement

• H222 Extremely flammable aerosol.
• H229 Pressurised container: May burst if heated.

Precautionary statements

• P102 Keep out of reach of children.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211 Do not spray on an open flame or other ignition source.
• P251 Do not pierce or burn, even after use.
• ​​​​​​​P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 oC/122oF.